Consulta: Configurar Modo Bridge o Puente

Publicado en 'Gadgets y Otros Productos' por Isaakioner, 10 Abr 2014.





  1. Isaakioner

    Isaakioner Miembro maestro

    Registro:
    12 May 2013
    Mensajes:
    545
    Likes:
    146




    Hola, tengo un routher TP LINK WA901 que no se como configurar en modo Bridge.

    Yo lo puedo configurar en modo REPETIDOR UNIVERSAL, pero ya he intentado en BRIDGE para tener el nombre de otra red.


    Yo se que en este modelo se puede por que tiene la opción y un amigo pudo hacer eso con mi red inalambrica, solo tuvo que configurar su routher. :jum:

    Pueden dejarme un video :paz: yo me rindo, no encontre la configuración.

    en Youtube había un video similar donde habia que configurar ambos routher ¬.¬ cosa que no quiero hacer.
     


  2. fredyac

    fredyac Miembro de plata

    Registro:
    4 May 2010
    Mensajes:
    3,723
    Likes:
    775
    Ese equipo no es router es un Access-Point, para tu caso solo debe escoger el modo Access Point .
    No puedes crear otra red ya que para eso necesitas un router.
     
    Última edición: 11 Abr 2014
  3. LLLearner

    LLLearner Miembro nuevo

    Registro:
    11 Abr 2014
    Mensajes:
    6
    Likes:
    2
    A continuación adjunto el documento de ayuda del TL WA701N, con posibilidades similares a tu router:

    Wireless Settings Help

    Note: The operating distance or range of your wireless connection varies significantly based on the physical placement of the AP. For best results, place your AP

    Near the center of the area in which your wireless stations will operate.
    In an elevated location such as a high shelf.
    Away from the potential sources of interference, such as PCs, microwaves, and cordless phones.
    With the Antenna in the upright position.
    Away from large metal surfaces.
    Note: Failure to follow these guidelines can result in significant performance degradation or inability to wirelessly connect to the AP.

    Operation Mode - Several Operation Modes are supported, including: (1)Access Point (2)Multi-SSID (3)Client (4)Repeater (5)Universal Repeater (6)Bridge with AP. The available setting options are different in various operation modes, and they are explained below.

    Access Point - This operation mode allows wireless stations to access.

    Multi-SSID - AP can support up to 4 SSID.

    SSID - Enter a value of up to 32 characters. The same Name (SSID) must be assigned to all wireless devices in your network. In Multi-SSID operation mode, enter SSID for each BSS in the field "SSID1" ~ "SSID4".
    Region - Select your region from the pull-down list. This field specifies the region where the wireless function of the AP can be used. It may be illegal to use the wireless function of the AP in a region other than one of those specified in this filed. If your country or region is not listed, please contact your local government agency for assistance.
    Channel - This field determines which operating frequency will be used. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point.
    Mode -This field determines the wireless mode which the AP works on.
    Channel Width - The bandwidth of the wireless channel.
    Max Tx Rate - You can limit the maximum tx rate of the AP through this field.
    Enable Wireless Radio - The wireless radio of the AP can be enabled or disabled to allow or deny wireless stations to access. If enabled, the wireless stations will be able to access the AP, otherwise, wireless stations will not be able to access the AP.
    Enable SSID Broadcast - If you select the Enable SSID Broadcast checkbox, the AP will broadcast its name (SSID) on the air.
    Client - This device will act as a wireless station to enable wired host(s) to access AP.

    Enable WDS - The AP client can connect to AP with WDS enabled or disabled. If WDS is enabled, all traffic from wired networks will be forwarded in the format of WDS frames consisting of four address fields. If WDS is disabled, three address frames are used. If your AP supports WDS well, please enable this option.
    SSID - Enter the SSID of AP that you want to access. If you select the radio button before SSID, the AP client will connect to AP according SSID.
    MAC of AP - Enter the MAC address of AP that you want to access. If you select the radio button before MAC of AP, the AP client will connect to AP according MAC address.
    Repeater - In Repeater mode, the AP with WDS enabled will relays data to an associated root AP. AP function is enabled meanwhile. The wireless repeater relays signal between its stations and the root AP for greater wireless range. Please input the MAC address of root AP in the field "MAC of AP".

    Universal Repeater - In Universal Repeater mode, the AP with WDS disabled will relays data to an associated root AP. AP function is enabled meanwhile. The wireless repeater relays signal between its stations and the root AP for greater wireless range. Please input the MAC address of root AP in the field "MAC of AP".

    Bridge with AP - This operation mode bridges the AP and up to 4 APs also in bridge mode to connect two or more wired LANs. Please input the MAC address of other APs in the field "MAC of AP1" to "MAC of AP4". AP function will also startup.